Quick Change Two Profiles Side by Side Metal Stud and
Track Roll Forming Machine with European Standards
1. The Main Parameter For metal stud and track roll forming machine
|No.||main parameter of metal stud and track roll forming machine|
|1||Suitable to process||Color steel plate|
|2||Width of the plate||depend on profiles|
|3||Roller||12 - 18 rows|
|6||Thickness of the plate||0.4 - 0.8mm|
|7||Productivity||8 - 15m/min|
|8||Material of the cutting blade||Cr12|
|9||Diameter of the roller||Φ75mm|
|11||Voltage||380V 50Hz 3phases or you need|
|14||Control system||PLC control(Panasonic)|
Manual Uncoiler—Feeding and guarding —roll forming machine—Computer
Control System—Hydraulic Control System—Hydraulic cutting —Run out
3. Components and Technical Specification
Usage:It is used to support the steel coil and uncoil it in a
turnable way. The steel coil is uncoiled by hand. Loading
Inner diameter: 470 - 520mm
Put the raw material through the beach to manufacture and process,
it can guarantee that the products are neat, parallel and
everything is uniformity. Please refer to the equipment regulation
to know the function of locate angle iron.
hydraulic oil into the hydraulic oil tank ,the pump drive the
cutter machine to begin the cutting work.
Computer Control box
The target piece`s length is adjustable and digit of it can be
adjusted. Computed mode has two modes: automatic and manual one.
The system is easy to operate and use.
It adopts the hydraulic drive and automatic location to decide the
dimension and cut the target products.
Material of blades: Cr12,quenching treatment,HRC62°
Main Roll Forming Machine
Material of rollers:45# steel,roller surfaces polishing, hard
plating , The polished surface and the heat treatment towards the
molds also can keep the molding plate surface smooth and not easy
to be marked when it is being stamped.
Run out table
To support the productions,2 sets,3m/set
4. Main Pictures